By periodic calibration & maintenance of your test equipment, you can identify and correct tolerance deviations in time. Based on your measurements, you can make pass/fail decisions in your test routine or troubleshooting.
This ensures 100% accuracy, repeatability and reliability. After all, inadequate or infrequent calibration can sometimes cause you to lose sleep:
Poor or incomplete calibration may lead to measurement inaccuracies or even significant measurement errors.
Your clients cannot ensure whether measuring or splicing devices used are still working within intended tolerance ranges.
With guaranteed specifications of electronic devices, depending on the measuring environment and ageing of the components, a so-called "drift" and thus an undesired shift in the measured value can occur.
If test equipment does not meet required specifications, it may result in annoying malfunctions, failures and costly rework.
So always ask yourself: "Is my measuring device still 100% ready for use and can I continue to rely on my measurement results?"
We help you to fulfil control and calibration obligations. In many cases, your measurement technology is required to be checked and calibrated on a regular basis. When testing fibre optic networks, for example, misinterpretations, a reduction in the quality of the connections or even failures must be avoided. Network operators have therefore established their own guidelines in some places, and proof of calibration must be provided for measurements made. These require traceable measurement reports and original spare parts that comply with the manufacturer's specifications.
As a certified service center and EXFO Gold Partner, we check and calibrate according to the manufacturer's defined test criteria and create the corresponding verification documents. The benchmark for our service is fast completion as well as 100 percent reliability and customer satisfaction. We calibrate and maintain your measurement technology:
We offer MORE than just calibration instructions:
We clean your device, check functionality, load firmware upgrades, perform test measurements and send automatic reminders for the next calibration date. We also check accessories or wear levels and provide missing consumables or new cases within our Calibration & Maintenance PLUS program.
Calibration & Maintenance EXFO 2 Wavelength OTDR includes following services:
To help you sleep peacefully, ask for our service offer for calibration & maintenance.
Get in touch with us!
The GW Instek MPO-2000 Series oscilloscopes offer a multifunctional measurement solution. Integrating a spectrum analyzer, waveform generator, multimeter, and DC power supply, they support Python scripting and advanced bus decoding, making them ideal for diverse electronic analysis and control tasks.