Computer Controls

GW Instek Isolated Function Generators

The MFG-2000 Series arbitrary waveform generators

MFG-2000 series, which has up to 5 simultaneous output channels (MFG-2260MFA/MFG-2260MRA), including CH1 and CH2 equivalent performance dual channel arbitrary function generator with the maximum 60MHz for both channels; RF signal generator, a standard AFG, which produces the maximum 320MHz sine wave and various modulation RF signals; pulse generator, whose frequency reaches 25MHz; power amplifier, which is ideal for audio range.

The above-mentioned five different functionality channels are separately or totally allocated on 10 models, which extend from the basic single-channel AFG with pulse generator models to five-channel models so as to satisfy various educational and industrial applications.

IDEAL FOR Various educational industrial and automotive applications.


  • Maximum Five Output Channels
  • 2 Equivalent Performance Arbitrary Channels Frequency: 1Hz ~ 10/20/30/60 MHz
  • RF Channel Frequency (FG/ARB/MOD) : 160/320MHz
  • Pulse Generator Frequency : 25MHz
  • Power Amplifier : Low Frequency, 100kHz, Output 20W
  • True Point by Point Output Arbitrary Waveform Function : 200MSa/s,
  • 100MHz Repetition Rate, 14-bit Resolution,16k Point Memory Depth
  • Earth Ground Isolation Design Among I/O Terminals and Instrument Chassis
  • Frequency Counter : 150MHz, 8 bits
  • USB Host/USB Device/LAN (MFG-22XX only)
  • 4.3 Inch TFT Color Display



The MFG-2000 series provides different industrial sectors with special dual channel waveforms:

  • IQ modulation signals,
  • low-frequency vibration simulation,
  • automotive sensors,
  • AM/FM broadcast signals,
  • PWM motor or fan control signals,
  • pulse synchronized signals,
  • pulse noise,
  • audio circuit or
  • devices such as speaker tests.

The series is ideal for various fields, including scientific research, education, research and development, production and quality control.

The AFG-3000 Series arbitrary waveform generators

The AFG-3000 Series is arbitrary waveform generator designed for industrial, scientific research and educational applications. The series comes in bandwidths of 80MHz (AFG-3081) and 50MHz (AFG-3051) with built-in multiple standard waveforms to meet users' diversified needs.

  • High 200MSa/s sampling rate
  • 16-bit Amplitude Resolution
  • Output from any section of 1M-point-long waveform
  • 4.3" high resolution LCD display/on-screen help/Impedance switch
  • Four ways to generate arbitrary waveform: Front Panel Operation
  • CSV file uploading, Direct Waveform Reconstruction (DWR), Arbitrary
  • Waveform Editing PC Software
  • USB, RS-232, GPIB interface support
IDEAL FOR Industrial, scientific research and educational applications.


- High 16 bit resolution, 200MSa/s sample rate and a 1M memory depth for editing arbitrary waveforms directly through the intuitive UI

- Switchable 50 Ohm and Hi-Z Impedances, built-in On-Screen Help for operation conveniently

- 4.3-inch high-resolution TFT LCD

- You can use dedicated PC software or IEEE488.2 commands to edit waveforms through USB, RS-232, and GPIB


APPLICATIONS Low-power architecture and ultra-low power deep sleep mode achieve long battery life. LESENSE peripheral supports a wide array of sensor topologies.
FAQ How many memory storage modes does the AFG-3000 support?

AFG-3000 provides three memory storage modes: Totally it includes save the settings, save the ARB waveform, save settings + ARB waveform 3 modes. The memory not yet been used will be display in blue font, while used in red.

How about the baud rate of RS-232 interface in AFG-3000 support?

It support 9600, 19200, 38400, 57600, 115200bps.

AFG-3000 built-in output impedance switching function, how to do this function?

AFG-3000 built-in 50 Ohm / high impedance switch. The 50 ohm is AFG-3000's original design, and high impedance is from calculation by software. This function is mainly to facilitate users in calculating and output data conversion, if users needs more precise data, users need to find their own 50-ohm impedance matching circuit for the hardware.

Interested? Don't hesitate to ask for your offer: